Project description
The project covers the design of a slip road connecting the AP-6 toll motorway with the N-VI road, as part of the Guadarrama Bypass (Madrid). This one-way road starts with a deceleration lane on the Madrid-bound carriageway of the AP-6 at km 51+700 and ends by joining the A Coruña-bound lane of the existing N-VI road through an acceleration lane, with a total length of 1,125 m.
The horizontal alignment, designed for a speed of 60 km/h, includes radii of 115, 120, 130 and 600 m, plus straight sections, with the corresponding transition clothoids. The vertical alignment is governed by the crossing of the N-VI, which is made by an overpass. Its structure, with a pronounced skew, is a single span with a deck of 4 I-beams 1.50 m deep and an average span of 30 m. The abutments and wing walls have direct foundations.
To allow the slip road to pass where it connects with the N-VI carriageway, one of the three spans of an existing structure where the AP-6 crosses the N-VI had to be opened up. This required removing the earth slope at the abutment and retaining it, using the “soil-nailing” technique: the cut was stitched with bolts and the face stabilised with shotcrete.
A large earth-retaining structure was also needed, built using “green wall” technology to help it blend into the environment: a core of soil reinforced with geogrids and a vegetated exposed outer face.
The work is completed with the earthworks, which required the treatment of an old inert-waste landfill, the design of pavements, drainage, street lighting, signage, delineation and barriers, fencing, relocation of affected utilities, environmental treatment of the whole and expropriations.


